30N Series - Spring Hanger
The 30N hanger series can be fitted with a range of springs to suit acoustic and weight requirements. Spring hangers are used to isolate against low frequency noise from sources such as footfalls and mechanical vibration.
The 30N also incorportates an LDS element. This part of the hanger isolates effectivly against higher frequencies, typically from airbourne sources.
30N datasheets and installation photos can be found in the grey bar to the right. Alternatively scroll down to view the rest of our range of acoustic spring hangers.
Related Products
HDLP-X Low Profile Ceiling Hanger
The HDLP-A Hanger (PREVIOUSLY CALLED THE CRCH-X) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same spring element as the 30-X and HDQF-X Hanger, and therefore has the same properties.
View Datasheet |
HS Spring Hanger
HDQF - Spring Hanger
HDQF-X quick fit spring ceiling hanger. Our HDQF-X hanger has been designed to aid the quick and easy installation of suspended acoustic ceilings.
HDQF Spring PDF
View Datasheet HDQF Spring Installation Instructions
View Datasheet |
HDQF DWG
View CAD File |
30N Series - Spring Hanger
Mason UK 30N acoustic spring ceiling hanger incorporating an LDS element.
30N Series PDF
View Datasheet 30N Series Installed
View Datasheet |
30 Series - Acoustic Spring Hanger
Mason UK 30 acoustc spring ceiling hanger. 25mm, 50mm, 75mm, 100mm and 125mm deflection available.
30 Series PDF
View Datasheet 30 Series Installed
View Datasheet |
Spring Hangers
Mason U.K. has a large range of spring hangers available to suit a wide variety of loads and acoustic requirements. Spring hangers can be combined with elastomeric rubber elements to provide vibration isolation across a wide frequency range. Click below to learn more
DNHS Acoustic Spring Hanger
Spring hanger incorporating LDS rubber element.
Acoustic Hanger- 25mm Springs
View Datasheet Acoustic Hanger- 50mm Springs
View Datasheet |