AB-716 Angle Head Restraint
The AB-716 is an angled, head restraint for the top / and of block and stud walls.
The top (and sometimes edges) of a wall may require support. Mason AB-716 channel incorporates closed cell, low density foam which provides support while preventing a solid connection between the wall and the building structure. In this way it ensure acoustic isolation.
If you would like to order or learn more about this product. Please contact Mason UK's acoustic engineers by using the details in the blue bar to the left or by clicking: the Contact tab.
Related Products
AFA - Acoustical Furring Attachment
The AFA is an acoustical furring attachment for use with metal or wood stud walling. The AFA clamps the top hat section of the metal framing system to which boards are then attached
AFA Data Sheet
View Datasheet |
AB-716 Angle Head Restraint
Angle head restraint for the top of the block and stud walls. The AB-716 provides support whilst ensuring acoustic isolation is maintained
AB-716 Angled Head Restraint
View Datasheet |
NPS - Partition Support
The NPS Partition Support is used to acoustically isolate the bottom channel of steel stud walls, held in place by a frame or hammer fixing. To learn more about the NPS please click below
NPS Partition Support PDF
View Datasheet |
SWW Masonry Isolation
Mason UK's SWW type wall isolation strips is designed to acoustically isolate a masonry wall from the base slab. Our SWW's are designed to suit the project
SWW Sheet Metal �W� Pad Wall Support
View Datasheet |
DNSB-A Sway Brace / Wall Tie
DNSB-A is a low frequency wall tie. It has a bolt end for stud walls or hooked end for masonry walls. Click below to learn more.
DNSB Sway Brace PDF
View Datasheet |
WIC-2-SM Sway Brace / Wall Tie
The Mason WIC-2-SM is a masonry wall tie designed to connect two masonry walls built together. No limit on cavity or wall thickness. Learn more about this sway brace by clicking the button below
WIC-2-SM Sway Brace / Wall Tie
View Datasheet |
WIC Sway Brace / Wall Tie
The WIC acoustic sway brace is a low profile, low cost wall tie. Minimum cavity = 40mm
WIC Wall Tie PDF
View Datasheet |
Isolated Walls
The walls of a space sensitive to noise or vibration transmission need to be isolated from the main building structure. The walls can be built on a floating floor or specially designed wall support plates. Click below to learn more.
DNSB-BM Wall Tie / Sway Brace
The DNSB-BM range is a very popular acoustic sway brace. It is a low frequency wall tie. Bolt end for stud walls or hooked end for masonry walls.
DNSB PDF
View Datasheet |